Save Time, Water, Energy, And Money With Instant Hot Water!

Having instantly available hot water at the fixture when you reach for the faucet saves you not only time, but water as well.  You don’t have to stand there running water down the drain while you wait. 
 
Lots of folks have fixtures so far away from the water heater that they turn on the hot water and go do something else instead of standing there waiting.  When they return the water is hot.  That means they have been running hot water down the drain.  The energy to heat water is much more expensive than the water itself.  This is a huge waste of energy and contributes to the emission of green house gases as well. An instant hot water system eliminates this waste of course.
 
Instant hot water systems can even result in cleaner dishes!  The leading cause of dishwasher problems is that the water often is not hot enough to completely dissolve the dishwashing detergent.  By insuring your dishwasher gets hot water you will have sparkling clean dishes.
 
There are a number of “instant” or “fast” hot water pumping/distribution systems on the market, and it’s important to choose the right system for your particular application. Some use pumps, some rely on thermo-siphoning, and not all systems will work will all types of water heaters.
 
Some of these systems manufactured by Laing, RedyTemp, and others place a pump and valve combination at the fixture furthest from the water heater.  The system pumps the hot water in a big loop, out of the water heater to the fixture, through the pump, through the cold water piping back to the water heater.  The pumps have very slow pumping rates.  When the valve between the hot and cold water lines detects hot water it closes.  This keeps the water at the valve at about 95 degrees.
 
The problem with this type of system is that it is really a “luke-warm” system.  Ninety five degrees is below the human body temperature so it actually feels like cool water.  Since you are not starting with cold water and the pipe is full of luke-warm water, it won’t take quite as long for the hot water to reach the fixture, but it certainly is not instant hot water! 
 
The pumping system is cycling on and off constantly all day long, and so it keeps the piping (both hot and cold) full of warmer than ambient temperature water.  This makes the water heater work harder, and uses significantly more energy than a standard plumbing system.  The pumps run for long periods too, so add that energy into the mix. 
 
These systems will not work with tankless water heaters.  Tankless water heaters require usually ½ gallon per minute or more to being flowing through the heater before it will turn on.  The Laing and RedyTemp systems don’t pump enough water to turn on the heaters. 
 
Another type of system puts the pump at the water heater and a valve at the fixture furthest from the water heater.  The pump creates a pressure difference between the hot and cold lines, and so when the valves under the sink open the water flows through into the cold water lines and back to the water heater inlet.  The valves are temperature controlled and close when they detect that 95 degree water. The Grundfos system allows the placement of more than one valve, even one for every fixture if so desired.  Watts makes a similar system but you only get to use one valve at one fixture. These types of systems often include a clock timer with them so you can shut them off when you aren’t going to use them.  It can be a pain when the power goes off and the clock gets screwed up.
 
Like the previous systems, these systems also keep the hot and cold water lines full of warm water and thus waste tremendous amounts of energy.  As with the previously mentioned pumps, these systems can not be used with tankless water heaters for the same reasons.
 
If saving water and being energy efficient are important to you then you will want to examine “Demand” hot water systems.  Demand systems deliver hot water rapidly to the fixtures upon demand. When you want hot water you push a button, and the hot water is pumped at high speed to the fixture.  When the hot water reaches the fixture the pump shuts off keeping hot water out of the cold water pipes.  Now you have instant hot water, nothing was run down the drain, and you didn’t waste any heat energy keeping the pipes hot all the time.
 
Metlund makes a system called a D’mand system with a number of models. They range in price from a little over $330.00 to over $500, and have a number of accessories like using motion detectors to turn on the pump. Metlund’s largest D’mand system will run most tankless water heaters.
 
Chilipepper Sales has a demand system called the Chilipepper Appliance. The Chilipepper Appliance has the most powerful pump on the market, and will work with any tankless water heater. It will in fact work with any storage type water heater as well.  The Chilipepper is the least expensive of the systems at $180.00.  Since demand systems only run for a few seconds each time they are used, they use very little electricity.  Typical systems use about $1.00 - $2.00 per year in electricity for the pump.
 
One of the best things about having a demand hot water system is that whenever you use hot water, and you push the button to start the pump, you will feel so darned good about not running all that water down the drain.

Original source: http://biginternetarticles.com/water-hot-energy-57147.php

Installing A Stained Glass Lamp Above Pool Table

As with any indoor sport you need a sufficient amount of light above a pool table. Pool table lights are often placed at the ceiling above pool table. These lights must be strong enough without hurting the eyes. This way, the players can clearly see the table, as well as the balls. Most pool table tops are deep green, and with poor lighting it is difficult to see anything but the green. Not only that, but a good light over a pool table also adds to the ambiance of the room. So much that people like to add neon lights around the perimeter of the room, in the darker areas, for an added effect. If you want to install a stained glass lamp above your pool table, you should choose a light that has at least four 100-watt light bulbs in it. Modern lamps provide sharp looks and different colors to fit any lifestyle. You should consider height of the ceiling and room capacity when choosing the right lamp. The lamp should provide an adequate amount of light over the entire pool table. Also, the bottom of the light should hang down between 30 and 35 inches from the top of the table. Be aware that this type of lamp is usually heavy because of the thick glass and metal that frames it. You don't want a stained glass lamp to fall down from the ceiling, do you? To avoid this possibility, you'll need to secure the lamp in a special way, as opposed to a light weight lamp. To start with, you'll need to remove any existing light before you proceed. If the light you're installing is a swag stained glass lamp that hangs from a chain on the ceiling, then you'll only have to install a metal hook for the lamp to hang on. To do this securely, you'll need to use a stud finder to locate a stud in the ceiling. You need to locate a stud as close as you can to the spot where you want the stained glass lamp to hang. Mark the found spot, and then use an electric drill to carefully bore a starter hole in the ceiling. Then, insert the metal hook and turn the threads into the ceiling as far as it will go. Finally, hang the swag stained glass lamp up on the hook, and run the decorative chain and wire up and out of the way. On the other hand, if the stained glass lamp needs to be connected to an electrical box above it, then you'll need to install it to an existing one. If no box exists, you'll need to install one. It would be a good idea to check with your local codes and permits department before you begin. You'll need to be aware of what the specific laws are regarding the wiring. And, be sure that the electrical box you install has a stud in the middle of the fixture. Before you start this all, make sure you read and follow the manufacturer's instructions and pictures that came with the electrical box. Then, after you shut off the power to the room you're working in, you'll need to cut a hole in the ceiling for the box to go in. You'll need to run a wire, if there isn't already one, from your breaker or fuse box to the box. Install the stained glass lamp onto the box by attaching the fixture to the electrical box. Use a hickey, which is a metal piece with a hole in the middle of it. The hickey fits over the stud and a nut is placed on it afterwards. It helps to secure the fixture to the electrical box which is secured to the ceiling. Finally, make sure you have everything connected properly, and then turn the electric back on.

Original source: http://biginternetarticles.com/lamp-table-glass-1301341.php

Seven Reasons You Might Need Mold Testing

Think you don’t need mold testing? You might reconsider after reading about these common mold concerns. Here are the top reasons you might need mold testing and no even know it. Reason #1 : You love antiques! Few people associate mold with art lovers but the fact remains, your love of antiques and heirloom quality rugs, fine furniture or other common tapestry items might put your home or office at risk for mold contamination. That musty odor often associated with age is often mold hidden deep in the fibers of fabrics, furnishing and other fine tapestries or linens. Mold spores are hardy – they can lay dormant for years until the right condition presents itself then viola’ – the spores have spread and you are now at risk. Reason #2 : You found a slow leak. Whether it was a leaky roof or broken pipe, slow leaks may cause a humid environment that makes the perfect breeding ground for mold spores especially if located near organic materials like wood or even carpet padding and fibers. Mold cleanup and a thorough inspection should be conducted to make sure the problem is eliminated. Reason #3 : You had a major flood. Major flooding – whether from burst pipes or storm damage – can result in the growth of mold and mildew in as little as 40 to 72 hours. Time is of the essence when dealing with water related damage – consider testing for mold anytime you have experienced major flooding. Reason #4 : You have a humid area of the home. Basements are notorious for high humidity levels so in addition to performing a mold inspection, it is a good idea to consider mold testing to verify what the naked eye might miss. Reason #5 : You are buying a home that you know little about. Any time you don’t know much about a home or piece of real estate it is a good idea to perform an inspection – unfortunately, most building inspections don’t routinely test for mold. It is usually a separate inspection or test. Take time to have it done anyway – it could save you more money in the long term. Reason #6 : You have unusual allergic or other health symptoms that could be caused by mold. A mold test is a good way to rule out potential health related issues stemming from your home. It’s a small price for peace of mind. Reason #7 : You are selling a home. Don’t be caught off-guard by unpleasant surprises – instead, find out about any potential problems in advance then take care of them to make sure you get top price and don’t frighten away would be buyers. Go with a reputable company like Kiwi services that provides Mold Testing , Mold removal services to handle your every need with just one quick call. From mold remediation to floor cleaning, your home will look its best and be ready for sale in no time at all.

Original source: http://biginternetarticles.com/mold-testing-might-254431.php

Safety & Security: Outwit Vandals With Window Security Films

Window film , also called window tint or Lustalux, is transparent plastic film which is applied to glass windows specifically to reduce heat and radiation from the sun. It is available in many different compositions with varying effects on the optical and mechanical properties of the underlying glass. Because window film is applied to finished glass it is easier to install and less costly than chemically-altered specialty glass. The fastest growing use of window films are by home owners and companies engaged in energy savings, glare reduction, ultra violet protection, heat reduction and retention, safety, security and graphics. Virtually any high-traffic area with windows or other surfaces such as Elevators, Restrooms, Display areas, Architectural elements are vulnerable to costly vandalism. In the case of windows, there's the additional threat of "smash-and-grab" thieves, who rely on fast access through your facility's broken glass to get their job done. Now, one can help foil destructive efforts, with Magnum safety and security tinting. A protective film that helps prevent scribing and other defacing of your base surface, yet one that vandal won't even know is there. If vandals leave their mark, the film can be peeled off and replaced easily, eliminating graffiti-and the need for costly glass replacement. Window Safety/security films are clear laminated polyester films that when bonded to glass, contribute making the complete window stronger. It hinders and slows down smash and grabs burglaries, and during explosions or natural disasters keeps glass together to minimize human injury and destruction. If a window that has had window film applied to it is broken, the film can help prevent the glass from falling into the room. In the event of broke glass, window film will limit injury and damage to people and property. Even if a window breaks, the window film will keep out the weather until the glass can be replaced. The thicker the film the better it is. In fact safety/security films have proven tested standards.

Original source: http://biginternetarticles.com/window-films-security-104265.php

Relocation Job Should Be Done By Professionals

 
Moving or relocation is very hectic and tedious task as we all know. It brings several unwanted and traumatic issues. In fact, it is a big undertaking and it should not be taken without a proper plan. You can get full services of a professional to shift your home or office to one place to another. Professionals can make your move easier. By hiring professionals you will be surly to a have a happy shifting. There are several packing and moving companies in all the major cities of India.
 
There are several reputed moving companies in Hyderabad and Mumbai offering services like shifting and relocation services, car carrier & transportation services, warehousing & storage services, residential shifting services, commercial shifting services, local shifting services, national shifting services, and international shifting services.
 
People come to Hyderabad and Mumbai from other various cities search of jobs and better lifestyle. So, in Hyderabad and Mumbai, shifting has become the norm of many residents. That’s the reason of popularity of packers and movers companies from Hyderabad and Mumbai. Moving companies from Hyderabad and Mumbai can assist you in your shifting your home or office and make your shifting easier.
 
Moving companies or relocation companies from Hyderabad and Mumbai can also assist their customers for office relocation and corporate relocation. They provide excellent packing and moving services to their customers at very cost effective rate. They perform their job of packing, moving, loading, unloading, unpacking, etc with proper care. They ensure their customers or clients to safe, secure and in time delivery of household or office items. Moving companies form Mumbai and Hyderabad are well-equipped with advanced technology and have expert team of professionals.
 
Packing and moving or Relocation companies from Hyderabad and Mumbai are well known among their customers for their quick, quality and value added services. Some of packing and moving companies from Mumbai and Hyderabad also provide some other value added services like air cargo services, sea cargo services, car carrier & transportation services, custom clearance, insurance coverage, courier services, parcel services, warehousing & storage services, accommodation services, etc.
 
Finding a right packers and movers company is also a big issue. People face the hard time to find the right and reliable packing and moving company that suits their needs. Finding an experienced, reliable, licensed and appropriate packing and moving company in Hyderabad and Mumbai like big cities can be very knotty task. You can ask from your friends, relatives or other persons that have recently moved their home or office with the help of professional moving company.
 
You can also search for Hyderabad Packers Movers and Mumbai Packers and Movers on internet to get quote information from various packing and moving companies. There are several website or web portals that provide information about shifting and moving services. You should always find quote from several companies and compare their cost and services and opt for one of them that suits your requirements. Another way to find moving company in Hyderabad and Mumbai is to shop around, so that you can compare their services and costs.

Original source: http://biginternetarticles.com/relocation-professionals-job-13386.php

Is Staging My Home Really Worth It?

All statistics show that homes that are well prepared for the market sell at a higher rate and at a higher price than homes that are not show ready. The seller will absolutely gain 100 – 150% of the staging cost back at the sell. Often sellers receive a higher appraisal on a staged home. Appraisers will take into consideration all upgrades made to the property. This includes carpeting, interior/exterior paint, landscaping and even appliances, just to name a few. Does it pay for a seller to go through the work and expense of staging their home prior to the listing? Absolutely it does, as the benefits to the seller are great and it is an absolute “Win-Win” situation for not only the seller but the buyer as well!



All real estate agents will agree that they show and sell staged homes more often than others as the staged home is ready to go for a buyer. A potential buyer will surely remember a home that has been professionally prepared and stat’s show that most return for a second showing that often results in a purchase.



Staging is the process of preparing the home to appeal to a large audience of potential buyers. The home must be ready for the buyer to purchase and move into immediately. Professional Home Stagers use their special techniques to prepare the entire home to show and appeal to all potential buyers. The goal of the “Stager” is Optimum First Impression! There is a special technique in professionally preparing a home to show and if a seller will go the extra mile in showing the house, they will, not only gain top dollar but will enjoy a fast sale.



If you wish to enter into the Home Staging industry see us today! We offer Complete Home Staging Training on CD-ROM as well as related products! Home Stages Designs http://www.Homestages.com

Original source: http://biginternetarticles.com/is-staging-my-home-really-worth-it--4466.php

Moving Storage Facilities

There are times when long distance moving California companies may have to store your belongings.  This can be an important part of the moving process.  There are several things you should know about moving storage. 
Long distance moving California companies may need to store your items when your move-in date is much later than your move-out date from your original residence.  This can happen for a number of reasons.  Perhaps you have sold your home but the home you are moving to is not yet available.  Long distance moving California companies would put your household goods into storage until the move could be completed. 
Another instance that long distance moving California companies may put your items in storage is when you have to move abruptly before housing can be found.  This can happen if you have a transfer at your job, or a change of station in the military.  While military moves are often paid for by the government, they may be done by long distance moving California companies companies. 
Long distance moving California companies will usually have their own storage facilities to use in such cases.  These storage facilities are geared to the use of a moving company.  They might have a special arrangement with an independent storage facility instead.
You may be able to negotiate a price with long distance moving California companies for your move that includes the storage of your goods, especially if they are not in storage long.  However, keep in mind that everything has to be handled two extra times – once to get it into storage and once to get it back onto the truck.
It is also important to check your insurance carefully.  Find out if your household belongings are covered while they are in storage.  You will be covered for any damages that happen during the usual long distance moving California companies’ services. 
Do not forget to consider the storage accommodations of long distance moving California companies when you are evaluating different companies.  You should know if they have their own dedicated storage or are sharing an independent storage facility with others.  It is also important to know what prices you will have to pay for the storage and whether it will cost more to get the insurance you want.

Original source: http://biginternetarticles.com/moving-storage-facilities-13388.php